Vt82c686a raid setup disk

On the reverse side of things, ISA slots are quickly dying so this feature is becoming less of a necessity.

It provides the serial, IR, and parallel ports as well as the Floppy Disk Controller for the motherboard. Why is this so special? This external controller not only occupies PCB area on the motherboard it also adds the cost of another chip to the price of the motherboard.

This is a feature the AMD South Bridge does not support, one reason why many motherboard manufacturers chose to go with the A over the AMD in their Athlon motherboard implementations. Most motherboards use an external chip to provide hardware monitoring functionality which takes up PCB space and adds the cost of the chip to the motherboard. The integrated hardware monitoring can monitor 5 voltages including the voltage supplied to the A chip itself , three temperatures including the temp of the A and two fans.

All Rights Reserved. Envelope Twitter Facebook-f Linkedin-in. All Data Recovery Services. All Locations.

Hit enter to search or ESC to close. Setting up RAID 1 can be scary, but fret not! We listed all of the process you need to do in a friendly way. Start Data Recovery. Posted Monday September 21, am. How do you set up raid from an existing drive? How to figure out that the raid drive has failed? How to set up raid 1 for small businesses? Back up Your important files and media before you begin so that nothing is lost.

Without a backup, even the most prudent methods are susceptible to vanishing in thin air. In case you want some existing files from the previous drives on the array to be installed, create a back up in an external location, and then restore it after the array is installed. Like the raid 0 It is not as important to use the drives of the same type and model in a raid 1 but requires the interface to be the same.

One of the most essential things to do next is to make sure is whether the motherboard supports the Raid 1. Check if there is a built-in raid controller In your motherboard after going through the manuals. Though the function is indeed the same, it is important to see what the utility in the Windows operating system is addressed.

Usually with Microsoft Windows the built-in raid utilities are also addressed with the same term. Connect the drive After confirming that the motherboard contains raid controllers or supports the drives, as soon as they are connected they will be detected by Windows.

Next, A window with disks that are not formatted that can be utilized will be visible on the screen. Make sure to set a name And a drive letter to the pool and it will appear in the drive label. To convert dynamic disk back to basic in Server Disk Manager, you have to delete all existing partitions before conversion. A software RAID 5 requires three disks at least; it not only can enhance the efficiency of the disk but also provide the best fault-tolerant.

A RAID 5 is a fault-tolerant volume in which the data is striped across an array of three or more disks. Parity a calculated value that can be used to reconstruct data after a failure is also striped across the disk array.

If a physical disk fails, the portion of the RAID 5 that was on that failed disk can be recreated from the remaining data and the parity. At least 3 disk will be required. About software RAID RAID is a technology that allows a volume partition uses together with the space on the multiple disks, in this way, disk's utilization and system performance can be improved. How to set up s oftware RAID 1 step by step? To set up software RAID, do as following: 1. Then, open a window.

Please tick another dynamic disk, and click "Add Mirror" button: 3. After completing, you will see the following screen.