Level one kvm-0201 manual

Please read this manual thoroughly and follow the Installation procedures. Previous Page. Next Page. Page 2: Overview KVM switch is your best companion while accessing two computers. Connecting the two cables from the LevelOne Cable KVM to the keyboard, mouse and monitor ports of your computers is all it takes! The complete installation is shown in figure 2.

Page 5! To re-sync the mouse: Regain mouse control after hot plug-and-play. Page 6 Trouble shooting Before you start, double-check all the connections. Make sure all the connectors are well seated. Keyboard connector and mouse connector are color-coded. Make sure only connectors of the same colors are mated and recycle the power for both computers. Symptom solutions Possible causes Recommended Print page 1 Print document 7 pages. Page 6: Introduction KVM switches to expand the capacity.

Revolutionized video enhancement technology ensures superb quality up to x The first digit of 7-segment LED indicate the bank you selected and the last two digits indicate which port you select on this bank. Page Hardware Installation 2. Hardware Installation Before installation, please make sure all of peripherals and computers have been turned off. The display output is the same at the local and remote console monitors. The priority mechanism is: the first move port has the priority and will release the priority if it did not keep input for 2 seconds.

Page Operation 3. Page Daisy Chain Connection 4. Daisy Chain Connection Note: Make sure that power to all the devices you will be connecting up have been turn off.

You must unplug the power cords of any computers. We do not recommend to cascading different models through the Daisy Chain connection. Page On Screen Display 5. It takes approximately seconds for the video signal to refresh after switching computers.

Re-synchronization of the mouse and keyboard signals also occurs. Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch, and does not affect your computers or software function in any way. Page Login Window Login Window Power on local console monitor, and power on the KVM Switch by plug in the power adapter, the Login window will show up waiting for user name and password. Page Port Name Port Name The first page shows the current port name and the selected port, and the operation hint.

If Security is enabled it will show up the Login window waiting for username and password. USER can only do the port switch and port search. When auto-scan function is activated, the KVM switch will auto-scan the host port one by one in the interval as setting. Press the Enter key or right button of mouse for editing. The last 8 columns are the access right of each user.